Is it difficult to open your garage door after pressing the remote control countless times?
In that case, there might be a problem with your garage door opener.
However, they malfunction due to different factors such as dead batteries or circuit problems.
It may also be due to motor failure, range problems, and so on.
A malfunctioning garage door opener can be entirely convenient for your warehouse operations.
As much as you want to avoid your operations’ downtime, everything is for naught if your garage door opener malfunctions.
With that, here are few indicators to determine if you need a warehouse garage door openers repair.
Why You Need a Warehouse Garage Door Openers Repair
As we all know, a garage door opener is a motor device responsible for opening and closing the door.
Lifting arms and chains are some of the components that comprise a garage door opener.
Moreover, these are the following problems for your opener and see what you can do about it.
1. Either the remote or the wall switch operates the opener.
There are many reasons why the garage door opener won’t respond to remote control and wall switch.
A blown circuit breaker, fuse, and GFCI outlet might be one reason.
If the lights and circuits are not working, reset the breaker or the GFCI outlet. If it doesn’t work, replace the fuse.
Another reason is maybe your remote needs a new battery.
Change the remote battery every 2 to 5 years to make sure it’s still working.
2. The garage door reverses after hitting the floor.
When you close the garage door, and it reverses back after hitting the floor, you need to adjust the opener’s close-force setting.
Also, if the rollers are already worn out, it may cause friction to the tracks, which might trick the opener that the door has reached the floor.
To address the issue, adjust the opener to tweak the sensitivity.
3. The motor still runs even after opening the door.
Usually, the motor won’t run anymore after the door has an opener.
But if the opposite happens, you should move the up-limit switch away from the motor system.
This issue is a rare case and can be fixed right away.
4. The garage door opener won’t move in winter.
Rollers get stiff during the colder months, which cause the opener to malfunction.
If this happens, adjust the sensitivity to the opener and inspect the screw.
You might also want to lubricate the rollers to move again. You can watch this video for the procedure.
5. The garage door won’t open.
There are cases when you have done different methods to fix your opener, and it still won’t work.
In this case, the opener might not be the problem. Some deeper issues such as broken and misaligned components might be the culprit.
Make sure to check the condition of the garage door parts.
If you see any wearing, damage, cracks, or dirt, it’s best to leave the repairs to a commercial garage door repair company in Vancouver.
DIY vs. Professional
When it comes to warehouse garage door openers repair, asking for help from a professional is the best solution.
You must leave the job to them since they know how to identify what might be causing garage doors to malfunction.
That said, here’s why you should hire a professional compared to doing it yourself.
DIY: A warehouse garage door weighs many pounds, even more than residential garage doors.
Thus, you need manpower and expertise to do the necessary repairs.
It’s a lot of work when repairing openers since many components make them function.
If you don’t do the fixes correctly, you might even cause more damage to your garage door.
Professional: The professionals have a wide range of experiences when dealing with garage door installation repairs, and so on.
Hence, they know how to fix it once a problem exists.
No matter what type of garage door opener you have, they know how to fix it.
You don’t need to worry about the job because they will safely and correctly do it.
If your opener is having some issues and is causing problems to your warehouse garage door, leave the job to Vancouver Overhead Doors.
Contact us, and we’ll promptly cater to your needs.