If you’re in the market for a new garage door bottom seal, you may be wondering how to choose the right one. There are many different types and brands available, so it can be difficult to know which one is right for you. In this blog post, we will discuss the different factors you need to consider when choosing and installing garage door bottom seal. We will also recommend some of our favorite seals on the market!

The different types of garage door bottom seals

There are two main types of garage door bottom seals: the T-type seal and the U-type seal.

The T-type seal

The T-type seal is the most common type of seal. It is made of a flexible PVC material and has a lip that fits over the bottom edge of the garage door.

The U-type seal

The U-type seal is less common, but it is made of a more durable rubber material. It also has a lip that fits over the bottom edge of the garage door.

How to measure your garage door for a seal

In order to choose the right size seal for your garage door, you will need to measure the door. The best way to do this is to measure from the inside of the garage door at the top, middle, and bottom. Once you have these measurements, you can compare them to the size chart on the product page of the seal you are interested in. For further assistance have a call with a professional.

What other factors should you consider?

In addition to size, there are a few other factors you should consider when choosing a garage door bottom seal. These include:

The type of garage door:

If you have a sectional door, you will need to choose a seal that is specifically designed for that type of door.

The climate:

If you live in an area with extreme temperatures, you will need to choose a seal that can withstand those conditions.

The level of traffic:

If your garage door gets a lot of traffic, you will need to choose a seal that is designed for high-traffic areas.

Installing the seal

Once you have chosen the right seal for your garage door, you will need to install it. The process is different for each type of seal, so be sure to follow the instructions that come with your product.

Here are a few steps to install a seal:

Remove the old seal:

If you are replacing an existing seal, you will need to remove it before installing the new one.

Clean the surface:

Use a clean cloth to remove any dirt or debris from the surface of your garage door.

Install the seal:

Follow the instructions that come with your product to properly install the seal.

Test the seal:

Once the seal is installed, open and close your door to make sure it is working properly.

We hope this blog post has been helpful in choosing the right garage door bottom seal for your needs! If you have any further questions, please feel free to contact us.