How to Adjust Sensors on Garage Door

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    Get in touch with our garage door repair team and help is on it’s way! When it comes to garage door repair in Vancouver and its surroundings, Better leave it up to the professionals. For a FREE quote and estimate..

    CALL NOW: ☎️ (778) 654 6470

    Or, fill out this form and we will contact you shortly




    Show us the damage: Send us some photos for a FREE cost estimate.

    How to Adjust Sensors on Garage Door

    Garage Door Spring Installation Vancouver

    If you are having problems with your garage door closing, then the most likely culprit is the garage door sensor. The garage door sensor is the two eye-looking sensors that sit about 6 inches from the floor. They shoot a laser between the sender and the receiver. If the laser beam is interfered with or the sensor is not working, then the garage door will not close all the way. If this is happening to you, we have put together 7 step checklist on how to adjust sensors on your garage door.

    Looking out to see if the signal is not connecting to the circuit board.

    In dealing with a sensor issue, you should be on the lookout for one or more of these clues. If the garage door moves downward only an inch or so, OR the head unit blinks and makes a clicking noise, OR the lights on the sensors are off, blinking, or flickering. These symptoms are a result of the signal from the sensors not connecting to the circuit board of the head unit.

    Closing the garage door while diagnosing and fixing the safety sensors.

    NOTE- If you need to close the door for security reasons until the issue can be remedied, simply pull the red safety rope to release the door from the operator and close the door manually (SEE VIDEO). You may also be able to hold down the wall console button to begin closing- then release the button just as the door sets down (requires a bit of timing).

    If you are having an issue, check to see if any of the following are true: the sensors are misaligned, there is an object in…

    Read more…

    Hope you enjoyed our article titled How to Adjust Sensors on Garage Door. Besides “How to Adjust Sensors on Garage Door”, feel free to browse our blog for more great content. Vancouver Overhead Doors.

    Recommended articles

    Crash victim identified | Coeur d’Alene Press

    COEUR d’ALENE — Police have identified a man who died in a single-car crash last week. Kerry S. Speight, 74, of Vancouver, Wash., was reportedly traveling westbound in the alley between Wallace Avenue and Garden Avenue around 8:50 a.m. Saturday when he crossed 3rd Street

    Industrial Garage Door Repair Company

    This Midwest Underground Castle is Really a Doomsday Bunker

    Could I interest you an a Midwestern castle? One thing you should know is that it’s mostly underground. Oh, and it’s also a doomsday bunker. This is what’s known as Subterra Castle. It was a missile base for Atlas-E rockets which had nuclear warheads. The

    Garage Door Repair Oakridge

    How Do I Choose a New Custom Garage Door?

    If you are going to purchase a new custom garage door you know that it is going to be a big expense. That is why you want to make sure that you do everything possible to make the right decision when it comes time to

    Garage Door Spring Installation Vancouver

    How to Choose a Garage Door Opener

    When you get a new garage door, sometimes it makes sense to replace the opener at the same time. Other times, your garage door won’t open, and upon inspection, your garage door opener has died and needs to be replaced. Whatever the case may be,