An automated garage door opener offers convenience to homeowners in Vancouver.
It is also one of the best-value investments you can spend for your home.
If your garage door opener needs replacement, then this guide fits for you.
It’s a great choice to buy a garage door opener in this technology age.
It’s convenient, hassle-free, and inexpensive depending on what type of garage door you’re going to buy.
Here are the things that make it convenient in many ways:
- Remote – The most convenient way to operate your garage door is through a remote control. It opens and closes your garage door wherever you are as long as it’s within range.
- Manual release feature – Garage door openers are automated, but they also have a manual release feature if you want to open it manually. If you’re going to give your car some ventilation, the manual release button lifts the door a couple of feet off the ground.
- Security lights – We recommend having your lights located above your overhead door as you drive your car through it. Security light automatically activates when the door is activated. In this manner, you can have enough visibility for you to safely park in your garage during the night. It will turn off when there’s no activity.
- Automation – Some garage door openers function like Siri. So if you want your kids to enter the house through your garage, you can command, “Open the garage door, Siri,” and the door will open.
- Vehicle compatibility – There are cars with built-in technology. So if you want to activate your door without your remote, you can prompt it using your car’s smart technology.
- Auto-close – It allows you to keep your garage open at your chosen time after you’ve parked your car.
Types of Garage Door Opener
These are the different types of garage door opener with different mechanisms in operating.
It is the most common type and the cheapest option out of the bunch.
It’s one of the homeowner’s most popular choices.
Its mechanism includes a chain attached to a trolley that elevates and lowers the door. It’s great for lifting even the heaviest garage door.
However, it can be very noisy.
If you are noise-sensitive and do not want to disturb your neighbors, this is not for you.
It uses a rubber belt to elevate and lower the door.
Belt Drive is considered the most premium option because it’s the quietest type, and it won’t disturb your neighbors and your family.
However, it’s the most expensive option. But if you’re willing to pay for what it gives, then belt drive is the one for you.
It uses a threaded steel rod responsible for moving the trolley. It’s perfect for tilted one-piece doors.
It’s also a quieter option than chain drives and is the most durable type.
However, if your garage door has panels, then this is not an option for you.
It does not require a chain, belt, or rod to function; instead, it uses a motor, ideal for any situation.
It operates smoothly and quietly and requires low maintenance.
Furthermore, it is a good option for all homeowners with varying property sizes or layout.
How much Horsepower do you need?
The larger and heavier your garage door is, the more power you need to open it. These are some options you can choose:
Half Hp is a popular option for 15-16 foot wide garage doors, which is the standard size.
A one-third horsepower garage door opener is excellent for single-car garage doors.
It’s perfect for custom-made garage doors and is more popular than other HPs.
A one-horsepower motor is ideal for the largest and heaviest garage doors, including overhead and segmented garage doors.
The typical range of installing or replacing a garage door opener in Vancouver costs between $241 – $591.
For most services, expect to pay an additional $150-$500 for the parts and another $65 to $85 per hour for labor.
However, some factors, such as brand, model, and Horsepower, can affect the installation’s final price.
You might need some handyman skills if you want to install a garage door opener on your own.
Since Vancouver is one of the world’s largest cities and a thriving business location, finding the best garage door repair company is not a problem.
For your overhead garage door installation and garage door opener maintenance, trust only Vancouver Overhead Doors.
Call us at (778) 654 6470 and experience best-in-class overhead garage door opener installation.
Garage Door Installation in Vancouver
This 2021, garage door installation in Vancouver has become very common.
However, if you still don’t have a garage door, or if your garage door is squeaking, has mold and rust like it came from the stone age, then it’s about time you get a fresh garage door installed.
Garage door installation in Vancouver is pretty convenient.
If you have the time, tools, mechanical knowledge, and skill to do it yourself, then good for you.
Then again if you’re just an average Joe who wants to install it yourself, then let us walk you through the process, before you call any professionals.
When installing a garage door, it could be very confusing to know which part is which.
You could just be standing over the sea of random pieces.
DIY Garage Door Installations
After finally understanding the various parts of a garage door system, it is finally time to put everything together.
Here are 10 easy steps to finally get your garage door installation:
1. Spring tension.
The first step is releasing the tension in the torsion springs.
Begin by fastening pliers that can be adjusted onto the spring shaft.
Wedge the pliers onto the divider above the door.
Insert a piece of steel bar into one of the gaps within the winding cone spring, which has holes gaps utilized for extricating and tightening.
Grip firmly to the pole, and loosen the set-screws while holding the winding cone in place.
Use the steel bars to release the spring one-quarter turn at a time.
Interchange the two poles, utilizing one to hold the cone consistent and the other to turn the cone after the primary pole is removed.
2. Removing the Old Door
You can start by removing the door panels.
Begin from the top of the panel then disconnect the hinges from the panel.
Be cautious when dealing with glass.
Disconnect the track by unbolting it from the doorframe.
If you plan to also replace your old automatic door opener, remove its track from above then remove the opener.
3. Door Panels
You can finally install your new door!
Start by attaching the hinges to the top of each panel.
Attach the supports for the axle to the bottom panel and to the top panel.
Afterward, put the bottom panel to fit the door opening.
Hold the panel right side up by hammering a nail through the wall next to the panel and bending it over to make sure the panel is held in place.
Make sure it is leveled before installing another panel.
4. Securing the Hinges and Installing the Track
From inside your garage, fasten the top half of the hinges to the panel above it.
Put its wheeled axles toward the side hinges and towards the bottom and top axle support.
You can then start installing the track by linking the brackets to the vertical track pieces.
Refer to your instruction manual to be certain you are installing the brackets at the right places.
When you’re done installing the brackets, secure them against a wall, and check if the wheels are lying properly on the track.
5. Installing the Spring Assembly to the track
Put the pieces that support the spring assembly together, then place them on the track.
Refer to the instruction manual to make sure you’re putting it in the right way.
Place the curved part of the track onto the vertical piece you installed beforehand then attach it to the other end of the ceiling bracket.
You may make use of the same supports for the ceiling that were utilized in your old door.
6. Fastening the Tracks Together
Start with fastening the parallel track to the upward track of the door.
Make sure the door fits properly before tightening the bolts up firmly.
When you’re sure about it being lined up smoothly, tighten up the bolts to the tracks.
7. Installing the Springs
Locate the middle of the opening, then mark it on the top of the door.
Make sure to mark it properly so you can attach the support of the springs with ease later on.
Connect the spring anchors to the springs.
After that, you can attach the spring locking cone.
When you’re sure everything is placed correctly and securely, bolt the two springs to the main header bracket.
8. Installing the Pulleys and the Torsion Rod
Start by sliding the torsion rod into the whole of the side header brackets.
Once sure that the rod is secure, attach it to the pulleys at each end of the rod.
Then install the center header bracket to the mark on the header.
9. Attaching the cable
From below, bring the cable up to attach it to both sides of the pulley wheel.
Rotate the wheel, for the slack to be pulled tight over the wheel.
Move the wheel to the header bracket and securely tighten it.
10. Tighten the Springs
Snap a line with chalk across the springs to help you know the number of times you’ve turned the springs, whilst tightening it.
By using the steel rods, tighten the spring by turning the tightening procedure you used on your old door.
Refer to your owner’s manual to find out the required amount of turns to tighten the spring.
Check the chalk line to see how many times you’ve turned it.
When it’s tight enough, tighten the bolts on the anchor to secure it in place.
Professional Garage Door Installation in Vancouver
If you can’t solve it on your own, it’s time to finally call for garage door installation or garage door repair in Vancouver.
Give us a call, and we’ll make sure to install that garage door in a jiffy.
Don’t hesitate; call us now.