Table of Contents
You probably don’t think much about your garage door when it’s working hard every day.
Whether it’s a manual or an automated garage door, it has components working together to keep doing its job.
One of the heavy-hitter components in garage doors is the springs.
They control and make the movement easier for the garage door. However, they are also prone to damage.
Thus, we will discuss everything you need to know about springs and how to repair a broken garage door torsion spring.
What are Torsion Springs?
The movement of overhead doors needs an ample of energy and tension, which the springs provide.
Over time, springs can wear out, and the amount of energy they produce reduces.
Torsion springs supply the force to make the garage door move.
It can be seen on the top of the garage door, wrapped around a tube.
When you open the door, the torsion spring unwinds and releases the stored energy to lift the door easier.
If you open an overhead door manually, you can see that the torsion spring is working until it is fully open.
On the other hand, the coil of torsion springs twist tightly.
Cables assist the spring to release the energy to make the door close.
Additionally, torsion springs help regulate the door’s movement to prevent it from plopping to the ground without any resistance.
Since overhead doors are subjected to movement every day, it’s no wonder why springs get damaged over time.
If you encounter a damaged spring, make sure to replace it right away.
Since DIY is dangerous, ask help from a garage door repair company near you in Vancouver.
How to Detect Damaged Torsion Springs
You can detect a damaged torsion spring by doing the following steps:
1 Conduct a visual inspection
Inspect the following red flags that indicate a broken torsion spring:
Stretchy spring: A spring should be coiled tightly together.
However, if it’s stretched out, it loses the mechanical tension. You see this when the door is closed.
Visible gaps in the spring: This happens when the spring is near the end of its life.
The spring loses tension, which causes it to snap.
2 Observe how the spring is behaving
Another method is checking for these signs in your spring:
- The overhead door seems to be off-tracked during the movement.
- There’s a misalignment at the door’s top section.
- The overhead door opens a bit then closes immediately.
- The overhead door shuts harshly.
- The overhead door won’t open.
- The cables are sagging.
3 You hear annoying sounds
Garage doors produce mechanical sound when moving.
If you hear a loud bang on your overhead door, the torsion spring broke.
Usually, a healthy torsion spring does not produce any sound.
However, once it fails, the torsion spring unwinds from the tube shaft causing it to create noise.
How to Address a Broken Torsion Spring
Seek professional help in Vancouver when you have a broken torsion spring.
While there are various DIY videos on how to repair a broken garage door torsion spring, you have to pay careful attention to the work.
You might expose yourself to injury when the repair is not done correctly.
Torsion springs have a massive amount of energy stored in it, and it isn’t easy to fix it.
The energy stored causes a sudden release of force.
If you’re considering DIY because you want to repair it right away, remember there are emergency garage door services that offer 24 7 garage door repairs in Vancouver.
It’s better to prioritize safety when trying to fix an issue, especially for garage doors.
While a DIY is cheap, you can assure the quality of the work of the professionals. Hence, leave the job to them.
On the other hand, if you’re an experienced DIYer, you can watch this video on how to repair a broken garage door torsion spring.
Often, a replacement is recommended when a torsion spring breaks.
Team up with Vancouver Overhead Doors!
Broken torsion springs cause a lot of issues for garage doors.
To address the problem, it’s best to call for a professional in Vancouver for your garage door woes.
With Vancouver Overhead Doors, you’ll receive the highest quality service that you deserve.
We don’t just provide garage door springs replacement.
We also offer garage door services from installation, repairs, maintenance, and tune-ups.
Consider DIY the last option for fixing your broken torsion spring. Leave the job to Vancouver Overhead Doors!