If you’ve been in business for any length of time, you know that commercial overhead doors can take a beating. They have to be able to withstand the weather and constant use, day in and day out. Over time, this can take its toll on the door springs, which can cause them to become misaligned or even break. In this blog post, we’ll show you how to adjust the springs on your commercial overhead doors so they can keep running smoothly for years to come!

Commercial overhead door spring adjustment is a critical part of keeping your doors running smoothly. By taking the time to adjust the springs regularly, you can extend the life of your doors and avoid costly repairs down the road. In most cases, you’ll only need a few tools to do the job, and it’s something that any business owner can do themselves.

If you have commercial overhead doors that are starting to show signs of wear, don’t wait until they break down completely. Adjusting the springs is a simple and easy way to prevent more serious problems from occurring. With just a little time and effort, you can keep your doors running like new for years to come!

How should Overhead spring doors be adjusted?

There are a few different ways to adjust commercial overhead door springs, depending on the type of spring system your door has. The most common type of spring system is a torsion spring system, which uses two large springs that are mounted on either side of the door. To adjust this type of spring, you’ll need to loosen or tighten the spring tension to raise or lower the door.

Another type of spring system is a tension spring system, which uses springs that are mounted above the door. To adjust this type of spring, you’ll need to add or remove weight from the springs to raise or lower the door.

Regardless of the type of spring system your commercial overhead door has, the goal of adjusting the springs is always the same: to raise or lower the door so that it’s level with the ground. By taking the time to adjust the springs on your commercial overhead doors, you can keep them running smoothly for years to come!

Which way do you wind torsion springs?

When adjusting torsion springs, you’ll need to wind them in the correct direction. The easiest way to determine which way to wind the springs is to look at the door itself. If the door is hanging down from the top of the opening, then you’ll need to wind the springs clockwise. If the door is hanging up from the bottom of the opening, then you’ll need to wind the springs counterclockwise.

Once you’ve determined which way to wind the springs, you can begin adjusting them. In most cases, you’ll only need to make a small adjustment to the spring tension to raise or lower the door. However, if your door is severely misaligned, you may need to make a larger adjustment.

Making commercial overhead door spring adjustments is a simple and easy way to keep your doors running smoothly. By taking the time to adjust the springs on your commercial overhead doors, you can extend the life of your doors and avoid costly repairs down the road. In most cases, you’ll only need a few tools to do the job, and it’s something that any business owner can do themselves. So don’t wait until your doors break down completely – adjust the springs today!

How much does it cost to wind a garage door spring?

The cost of commercial overhead door spring adjustment will vary depending on the type of spring system your door has. In most cases, you’ll only need to make a small adjustment to the spring tension to raise or lower the door. However, if your door is severely misaligned, you may need to make a larger adjustment.

In general, the cost of commercial overhead door spring adjustment will be much lower than the cost of replacing your springs entirely. By taking the time to adjust the springs on your commercial overhead doors, you can extend the life of your doors and avoid costly repairs down the road. So don’t wait until your doors break down completely – adjust the springs today!